Printa 990 Series Pressure Pad UV Exposure Unit
The Compact Choice For Screen
Making
The Printa 990 series unit is one of
the smaller models we offer and is specifically intended
for use with the 990 series pad printer for the production
of single pad printing plates. The tubes are housed
in the top of the steel case and artwork and plate material
are placed inside a removable pressure pad based cassette
module. The units are coloured to match the 990 series
machinery and take up very little space. When the exposure
module is placed inside the unit, the exposure time
is selected using the up and down buttons, and the start
button can then be activated.
The unit is extremely light and is supplied
with a carrying handle. It can also be used to process
pad printing plates for the 990 series pad printing
system.

An electronic timer is fitted to the front
of unit and is housed in a touch sensitive membrane.
Exposure time is entered by pressing either the up or
down arrow until the desired time is shown. The exposure
cycle is started by pressing the start button, and when
finished, the display flashes, a buzzer sounds the display
returns to the original setting.
Please review the Xeros range of UV units
if a more advanced timer control is a required feature.
The Xeros range of UV units should be purchased when
fine detail or photographic reproduction is required.
Where this is not the case, the Black Box will prove
more than adequate.

The standard specifications of the 990 series
UV unit are as follows.
| |
990 Series |
| Working area |
22 x 14 cm |
| UV output |
4 x 15 watt |
| Dimensions |
32 x 20 x 17 cm |
| Weight |
10 kg |
| Timer |
500 seconds |
- Produce water and solvent washable pad printing
plates with the 990 series unit
- Produce water washable hot foil printing plates
with the 990 series unit
- Process the ID-MARK imaging system with the 990
series unit

|