ID-MARK® Imaging Material
Performance Data.
ID-MARK
® Materials meet the physical property requirements
of MIL-P15024D
ID-MARK
® Materials meet the requirements of FAR 25 Amdt.
25-72 paragraph 25-853 (a) app. F Part 1
CSA
Approved - File #111331 Class #792105
NASA
Approved
Click the PDF logo to open the ID-MARK® literature and specifications.
| TEST |
CONDITIONS |
RESULT |
| Chemical
resistance |
Four
hours immersion in: |
|
| |
Water |
No
effect |
| |
Alcohol
(Isopropyl) |
No
effect with overlam |
| |
Alcohol
(Isopropyl) |
Slight
fading without overlam |
| |
Oil |
No
effect |
| |
Hydrocarbons |
No
effect |
| |
Base
(pH=10) |
No
effect |
| |
Acid
(pH=4) |
No
effect |
| |
|
|
| Abrasion
resistance |
Taber
abrader CS-17 |
Image
dulls after |
| |
wheels
with 1000g load |
|
| |
With
overlam |
700
cycles |
| |
Without
overlam |
73
cycles |
| |
|
|
| Salt
spray |
5%
concentration at |
|
| |
35
Celsius for 72 hours |
No
effect with overlam |
| |
|
|
| Exterior
conditions |
Durability |
|
| Humidity |
95%
relative humidity at |
No
effect with overlam |
| |
35
Celsius for 72 hours |
|
| |
|
|
| Temperature |
-28
to 121 Celsius for 7 days |
No
effect |
| |
|
|
| Long
term exposure |
5
year exposure at 90 degree |
Black:
no effect |
| |
angle
on aluminium and |
Red,
blue, grey, green |
| |
polyester
plates |
with
overlam: no effect |
| |
Weatherometer
simulation |
|
| |
|
|
| Shelf
life |
Conditions |
Time
period |
| |
Plates
should be stored in a |
One
year minimum |
| |
clean,
low humidity area |
|
| |
Temperature
25 Celsius |
|

Contact us for
more info
 |