Thermo Cure 2500 Pad Printing Dryer


Compact Pad Printing Tunnel Dryer

In an industry where big is normally better, the Thermo Cure 2500 tunnel dryer stands out from the crowd. A truly portable machine that can be run from a standard single phase, 13 Amp power supply, this unit compromises on nothing despite its small size.

The Thermo Cure 2500 can be supplied with or without a moveable stand, hence can be placed on a worktop with great ease. The unit has a sophisticated on-board electronic controller that allows the user to fine tune temperature, by-pass speed, temperature display reading and conveyor direction. The Thermo Cure 2500 is also economical to run as heated air is re-circulated throughout the body of the machine, yet due to the triple lining construction, the unit remains cool to the touch. Two barn doors are completely adjustable and can be lowered to the required height reducing heat loss to a minimum.

Click the PDF logo to open the dryer literature and specifications.

The Thermo Cure 2500 is a must when the time taken from printing to packaging of the product has to be as short as possible. Hence projects that are have tight turnaround times would benefit from the use of a post-print heat cure. In addition, certain materials do need to be printed using two component inks, and the recommended epoxy based additive (hardener) does require the use of radiant heat to cure the finished print.

If you would like to consider purchasing a tunnel dryer that can be used to cure both pad printed promotional itmes and also Plastisol based screen printed garments, please click here to view the Omni Cure dryer.

The standard specifications of the Thermo Cure 2500 are as follows:

• Compact size
  
  
• Sophisticated electronic controller with digital display
  
  
• Convection heating element (3600 Watt)
  
  
• Belt out feed length: 43 cm
  
  
• Bi-directional belt drive
  
  
• Adjustable barn doors
  
  
• Castored stand for easy movement
  
  
• Single phase 16 Amp power supply required.
  (Mains supply point / connection to be arranged by the client at own cost.)
  
  
• Temperature range up to 200 degrees Celsius
  
  
• Oven chamber size: 18 (h) x 33 (w)x 71 (l)cm
  
  
• Belt in feed length: 20 cm
  
  
• Belt out feed length: 20 cm
  
  
• Size when on tabletop: 57 (h) x 46 (w) x 104 (l) cm
  
  
• Size when on stand: 130(h) x 46 (w) x 104 (l) cm
  
  
• Weight 70 kg
  
  
• 5 year limited warranty on non electrical components (to original purchaser only)
  

The following table shows the specification of the Printa system range of conveyor based tunnel dryers and should help with evaluating which specific model fits with your individual requirements.

You are currently viewing specifications for the Thermo Cure conveyor dryer. If you would like to view the product information for other units, please click on the name shown at the top of each column.