Shop

Low Cure Additive For Excalibur Plastisol Inks

£90.07 excl. VAT

Reduce curing temperatures in many Excalibur direct printing inks by as much as 9.5°C. This represents a substantial saving in the running cost of a dryer, thereby lowering overheads.

In stock (can be backordered)

Product price:
Additional options total:
Order total:
Category:

Description

An addition of 5% to 6% by weight of Excalibur Low-Cure Additive (LCA) reduces curing temperatures in many Excalibur direct printing inks by as much as 9.5°C.

Consult the technical data sheet for the exact curing temperature of the Excalibur plastisol the LCA will be mixed with. After curing inspect the print for a complete cure by stretching, or an even more definitive test would be to cut the print in half, wash one-half of print 3-5 times and compare to the unwashed print. If the print is fully cured both halves of print should look identical.

Resources

Documentation

Low Cure Additive MSDS

Please Note:
Dye migration or colour bleed can occur up to two weeks after printing so it is imperative that fabrics are tested for dye stability before a production run.

Specifications

Mixing & Testing

Always ensure that any additive mixed into Excalibur plastisol is very thoroughly mixed. We also highly recommend that test prints are done to ensure that all parameters are known and the required effect has been achieved prior to doing a production run.

Please note that these additives have been thoroughly tested in Excalibur plastisol ink and we cannot guarantee the same results if they are mixed with a competitive brand of plastisol ink.

You may also like…